Resistencias de Banda Mica
Diseño y manufactura de resistencias de Banda mica y cerámica.
Termostatos con Bulbo Capilar
Rango de control 50 a 350 Grados Centígrados, 25 A Max
Resortes Para Troquel
Diseño y Manufactura de Resortes Industriales, Troquel, Agrícola, Residencial...
Resortes Para Brincolín
Diseño y Manufactura de Resortes Industriales, Troquel, Agrícola, Residencial...
Termostatos de Contacto Ajustables
Termostatos ajustables tipo Plancha, Claxon, Ulanet...
Válvulas Neumáticas
SMC, FESTO NEUMATICS, PISCO, FABCO, CLIPPARD, BIMBA
Resistencias Para Parrillas Eléctricas
Resistencias eléctricas para Parrila, Hornos, Estufones, Freidoras
martes, agosto 27, 2013
lunes, agosto 26, 2013
iPhone consume más energía al año que un refrigerador
2:59 p. m.
consume de energia, DIRCASA, iphone
La vida contemporánea nos ha acostumbrado a depender de determinados gadgets y dispositivos que a pesar de su utilidad o funcionalidad, son sin embargo especialmente lesivos para el medio ambiente.
El caso del popular iPhone, que de acuerdo con el estudio “The Cloud Begins With Coal: Big Data, Big Networks, Big Infrastructure, and Big Power”, un iPhone puede gastar tanta energía en un año como un refrigerador, sin duda una comparación desmedida teniendo en cuenta las características de ambos objetos.
Según la investigación, un usuario de iPhone Wireless con Verizon consumió 1.58 GB de datos por mes en 2012, esto es, 19 GB por año. Esta cifra debe multiplicarse por 19.1 kilowatts, la energía necesaria para alimentar 1 GB, con lo cual se obtiene un gasto de 361 kilowatts hora de electricidad por año. Si a esto se añade la energía necesaria para cargar la batería (3.5 kWh) y y la cantidad de electricidad necesaria para cada conexión (23.4 kWh), se obtiene el total de 388 kWh al año.
“A nivel individual, cuando se cuentan todos los componentes de uso —no solo de carga— el iPhone promedio consume más energía al año que un refrigerador de tamaño mediano”, se concluye en el sitio. El gasto de energía anual de un refrigerador se estima en menos de 380 kWh al año.
From Carlo's Desk...
dircasa@live.com
viernes, agosto 23, 2013
Las 17 mejores frases para emprendedores
8:04 a. m.
emprendedores, frases
Fotografía cortesía de Pandu Adnyana
Fuente: www.teinspira.com
¿Buscando alguna inspiración para montar tu propio negocio?. Estás son algunos de los pensamientos que famosos emprendedores han hecho sobre emprender. Si te gusta alguna frase, twitéala. Si falta una, envíanosla para que la podamos incluir.
- “Acepta la responsabilidad de hacer de tus sueños una realidad” Les Brown Twitéala
- “Ser un emprendedor es vivir unos pocos años de tu vida como nadie quiere, de tal forma que puedes disfrutar del resto de tu vida como nadie puede” Anonymous. Twitéala
- “La mejor recompensa de convertirte en millonario no es la cantidad de dinero que ganes. Es la clase de persona en la que te tienes que convertir para llegar a serlo” Jim Rohn Twitéala
- “Creo honestamente que es mucho mejor fallar en algo que amas que tener éxito en algo que odias”“ George Burns Twitéala
- “Un negocio que no hace otra cosa más que dinero es un negocio pobre” Henry Ford Twitéala
- “Puedes preguntar a los clientes qué quieren, y después intentar dárselo. Pero, en el momento en que puedas proporcionárselo, ellos querrán algo completamente nuevo” Steve Jobs Twitéala
- “Emprender no es ni una ciencia ni un arte. Es una práctica” Peter Drucker Twitéala
- “Yo siempre he sido un emprendedor, pero nunca ha sido una cuestión de dinero. Me gustan los retos, cuanto más difíciles mejor” Terry McAuliffe Twitéala
- “Mi hijo es ahora un “emprendedor”. Es lo que te llaman cuando no tienes trabajo” Ted Turner Twitéala
- “Dile a todos lo que quieres hacer y alguien querrá ayudarte a hacerlo” W. Clement Stone Twitéala
- “El emprendedor siempre busca el cambio, responde a él y lo utiliza como oportunidad” Peter Drucker Twitéala
- “Cualquier cosa que la mente pueda concebir y creer, puede ser conseguida” Napoleon Hill Twitéala
- “Todo empieza como nada” Ben Weissenstein. Twitéala
- “Haz feliz a aquellos que estén cerca, y aquellos que estén lejos vendrán” Proverbio chino Twitéala
- “Un emprendedor tiende a morder más de lo que puede digerir con la esperanza de aprender a digerirlo mientras tanto” Roy Ash Twitéala
- “Ir juntos es comenzar. Mantenerse juntos es progresar. Trabajar juntos es triunfar” Henry Ford Twitéala
- “Me gustaría ser un 150% emprendedora y un 150% madre, pero he encontrado muy difícil ser las dos cosas. Soy un 75% y 75% (mejor que el 100% pero menos de lo que estoy acostumbrada a ser en el trabajo)” Barbara Corcoran Twitéala
From Carlo's Desk...
dircasa@live.com
jueves, agosto 22, 2013
Temperature sensors: Make the right choice, RTD vs. TC
2:14 p. m.
temperature sensors
When you need a temperature measurement, one of the most basic decisions is choosing which kind of sensor to deploy. The application should guide your decision.
Ashleigh Hayes
Fuente: www.controleng.com
Temperature variances in process industries can have significant impact on profits, safety, and quality. A variety of industries and applications are affected, including oil and gas, power, refining, petrochemical, pharmaceutical, and more. Monitoring temperature accurately is dependent upon several factors, including selecting the right sensor for the specific application and process.
Two of the most common temperature measurement devices are resistance temperature detectors (RTDs) and thermocouples (TCs). The technology behind them is different, each having its own benefits that drive appropriate selection.
An RTD uses the principle that the electrical resistance of a metal increases as temperature increases—a phenomenon known as thermal resistivity.
In comparison, a TC is a closed-circuit thermoelectric temperature sensing device consisting of two wires of dissimilar metals joined at both ends. A voltage is created when the temperature at one end of a wire or junction differs from the temperature at the other end. This phenomenon is known as the Seebeck effect. That voltage depends on the particular metal as well as the temperature difference. Comparing the different voltages created by the different metals is the basis for TC temperature measurements.
Comparing the differences
RTDs are constructed of a resistive material with leads attached and usually placed into a protective sheath. The resistive material may be platinum, copper, or nickel; the most common is platinum because of its high accuracy, excellent repeatability, and exceptional linearity over a wide range. It exhibits a large resistance change per degree of temperature change. The two most common RTD sensor styles are wire-wound and thin-film.
Wire-wound RTDs are manufactured either by winding resistive wire around a ceramic mandrel or by winding it in a helical shape supported in a ceramic sheath—hence the name wire-wound. For thin-film RTDs, a thin resistive coating is deposited on a flat (usually rectangular) ceramic substrate. Thin-film RTDs are typically less expensive than wire-wound RTDs because fewer materials are needed for their construction.
Normally, RTDs are much more repeatable and have better sensitivity than TCs. Long-term drift of an RTD is predictable, while a TC drift is often erratic. This provides the benefit of less frequent calibration and therefore lower cost of ownership. Finally, RTDs provide excellent linearity. When coupled with the linearization performed in a quality transmitter, a precision of about 0.1 °C is possible, which is much better than what is possible with a TC.
In comparison, a TC is a closed-circuit thermoelectric temperature sensing device consisting of two wires of dissimilar metals joined at both ends. Various combinations of metals are classified as types and have specific characteristics. The most common types are J (which uses iron and Constantan) and K (which uses Chromel and Alumel). TCs have faster response times and higher temperature ranges than RTDs, but are also less accurate. TCs have heavy gauge wire construction for durability and therefore can withstand high vibration (see Figure 1). Chart A compares key sensor characteristics.
Choosing the right sensor technology
When choosing the right sensor for your process and application, there are a few basic questions that you should ask. The answers will provide valuable insight for selecting the appropriate sensor.
1. What temperature range you are trying to measure? When selecting a sensor, it is important to determine the correct temperature range. If the temperature is above 850 °C, you must use a TC. If it is below 850 °C, you can select either an RTD or a TC. Also, keep in mind that wire-wound RTDs have a wider temperature range than thin-film RTDs (see Chart B).
2. What is your required sensor accuracy? Determining the level of accuracy needed is also an important factor in the selection process. In general, RTDs are more accurate than TCs, and wire-wound RTDs are more accurate than thin-film RTDs. Assuming there are no other factors driving the selection of one technology over the other, this guideline will help you find the most accurate sensor technology.
3. Is process vibration a concern? The amount of process vibration also needs to be considered when selecting a sensor. TCs have the highest vibration resistance of all of the sensor technologies. If you have a known high vibration, TCs will give you the highest reliability. Thin-film RTDs are also resistant to vibration; however, they are not as robust. Wire-wound RTDs should not be used in high-vibration environments.
The right choice brings the right results
The overall key to success is asking basic questions and matching up the information with the right sensor for your applications and process. An example would be adding a temperature measurement to a pipeline where the measurement is under varying conditions with constant vibration and a process temperature variance of 200 to 300 °C. The goal is to have the best possible accuracy despite these challenges.
To determine what type of sensor to use, first consider the differences between TCs and RTDs. The temperature range makes both sensor technologies feasible for this application. TCs are known for their higher vibration tolerance, so at a first glance TCs would appear to be a good option. However, in this specific instance the measurement requires the best possible accuracy. The right choice for this application would be a thin-film RTD. Thin-film RTDs are known for their higher tolerance to vibration than wire-wound RTDs, and will provide a higher accuracy than a TC.
A second example would be the temperature in a reactor that ranges between 550 and 900 °C with little vibration. The goal is to gain accuracy within ±5 °C. RTDs provide consistent accurate measurements, especially in environments with little vibration. However, don’t forget the temperature range. RTDs typically should not be used above 850 °C. Since the process temperature can range up to 900 °C, a TC would be selected. Sensors are more susceptible to failure and inaccurate measurements when used in improper temperature ranges. That is why it is critical to select the correct sensor.
Ashleigh Hayes is a marketing engineer for Emerson Process Management.
From Carlo's Desk...
dircasa@live.com
Alumnos de la UNAM obtienen segundo lugar en competencia de robótica en Holanda
1:32 p. m.
#robotica, 2013, COMPETENCIA, HOLANDA, UNAM
FUENTE: www.fafhoonoticias.or
Estudiantes de los planteles 6 y 8 de la Escuela Nacional Preparatoria (ENP) de la UNAM obtuvieron el segundo lugar en la categoría juvenil de la competencia de robótica internacional Robocup 2013, que se celebró hace unas semanas en Eindhoven, Holanda.
La escuadra universitaria, llamada CoyoSpace, se sumó al certamen que convocó a más de dos mil 500 participantes de distintos grados académicos provenientes de más de 40 naciones.
La mayoría de los universitarios festejó el triunfo con la confirmación de haber sido aceptados en las carreras de su elección: Haydeé Valdés Quiroz, en Medicina; Tania Fernanda Andrade Maqueda, en Relaciones Internacionales; Luis Antonio Salas Domínguez, en Derecho, y Juan Miguel Fernández Aguirre y Luis Óscar González Siu, en Mecatrónica.
En tanto que Raúl Eduardo Noria Campuzano, de prepa 6, continuará su formación en el bachillerato; mientras Ariana Domínguez Reyes, la única perteneciente al plantel 8, seguirá en la educación media superior con la esperanza de acceder pronto a una licenciatura y, además, participar en la edición 2014 del certamen, a realizarse en Brasil.
Los universitarios lograron el segundo lugar en la rama Junior por Equipos de la categoría CoSpace Rescue, detalló Sergio López Luna, que imparte matemáticas en el plantel 8 y quien acompañó a los jóvenes en la competencia.
Por participar en la modalidad SuperTeam, México unió esfuerzos con dos conjuntos de China y uno de Japón, para formar una de las escuadras más grandes del evento, únicamente superada por la integrada por dos equipos de China, uno de Japón y otro de Irán.
Según los lineamientos establecidos en el apartado RoboCup Junior CoSpace Rescue, los participantes deben programar un robot que interactúe en dos escenarios: uno virtual y otro real. Éstos deben reconocer objetos de distintos colores en un área delimitada por salientes y evitar bordes y obstáculos.
Para llegar a la competencia internacional, la representación universitaria antes tuvo que vencer en la etapa nacional, realizada en mayo pasado, en Puebla.
El equipo CoyoSpace pertenece a la primera generación del Taller de Robótica, que busca aplicar conocimientos de informática, física y matemáticas. La iniciativa surgió del proyecto PAPIME PE101411 La robótica como herramienta para el aprendizaje interdisciplinario de la ciencia, con apoyo de la DGAPA.
From Carlo's Desk...
dircasa@live.com
Forma de Contacto:
Powered by
EMF Form Builder
Report Abuse



















